|
|
|
|
|
|
|
|
  |
 |
 |
 |
 |
 |
 |
Last updated: 14 July 2006
Client side phones.
All GSM telephones capable of receiving SMS messages
are supported. This includes 100% of all GSM phones as far as we
know.
Server connected GSM equipment.
All server connected GSM equipment is connected to
server via serial or USB data cable, which can be bought from your local dealer.
Make sure that you have the correct cable for selected GSM phone.
NOTE! We do not test all telephones on the market. The list below is just a few models we have tested inhouse. DynaPass is using the standardized AT+ command set to communicate with the phone.
Serverside GSM Modules that works OK
| Manufacturer | Model | Note |
| Siemens | M20T | old model |
| TC-35 iT | ||
| MC-35 iT | The difference is tha MC supports GPRS. TC is only GSM. DynaPass does not need GPRS. | |
| TC-65 | Quad band (850,900,1800,1900) works in Europe and USA | |
| Sony Ericsson | GM29 | European distribution: Rutronik |
For commercial systems, we strongly recommend that GSM Modules are used instead of Phones due to:
Serverside GSM Phones that works OK
Manufacturer
Model
Note
Ericsson
T18
Serial data cable with power extension is recommended.
T28
R320
T39
T68
T300
T610
T630
Z600
K700i
K800i
Nokia
6210
Siemens
35
All models in serie 35. Serial data cable with power
extension is recommended.
Serverside GSM Phones that does not work
Manufacturer
Model
Note
Nokia
D211
This WLAN/GPRS PC Card module
requires special Nokia SDK drivers for SMS. It is not
supported.
Enfora
EDG1228
This USB module requires special drivers and commands and is not
supported.
 |
Download the latest DynaPass release for evaluation from our FTP server. |
 |
DynaPass FAQ (Frequently Asked Questions). |
 |
See also White Paper for DynaPass |
 |
|
|
||
| © Copyright 2004-2008 | Developed by April System Design |